●Ⅰ.MECHANICAL 1、 Operation Force :0.25kgf Max 2、 Stroke : 0.90mm 3、 Operation Temp : -20℃～＋70℃ 4、 Storage Temp : -40℃ to 85℃ ●Ⅱ.ELECTRICAL 1、 Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA 2、 Non-Switching Rating : 100mA, 50VDC 3、 Switching rating : 25mA, 24VDC 4、 Contact resistance : (a) 50 mΩ max. at initial (b)100mΩmax. after life test 5、 Insulation Resistance : 100MΩ, 500VDC 6、 Dielectric Strength : 500VAC／1 minute 7、 Capacitance : 5pF max 8、 Circuit : Single pole single throw ●Ⅲ.SOLDERING AND CLEANING PROCESSES 1、 Keep all switch contacts in their “OFF” position for all operations 2、 WAVW SOLDERING : Recommended Solder Temperature at 500°F (260℃) max. 5 seconds 3、 HAND SOLDERING : Use a soldering iron of 30 watts, controlled at 608°F (320℃)approximately seconds while applying solder 4、 CLEANING PROCESS : Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used do not subject the switch to solvents at temperature above 125°F (51℃) ●Ⅳ.MATERIALS 1、 BASE：ULFV-0，PBT，Black 2、 COVER：ULFV-0，PBT，Black 3、 BUTTON: ULFV-0，PBT，White 4、 TERMINAL ： Alloy Copper， Gold plating ●Ⅴ.PACKING All DIP Switches are shipped in standard IC tubes with all poles in the “OFF” position